of the article produced. This article either results from the mere mechanical fitting together of partial products made independently, or owes its completed shape to a series of connected processes and manipulations.

A locomotive, for instance, consists of more than 5,000 independent parts. It cannot, however, serve as an example of the first kind of genuine manufacture, for it is a structure produced by modern mechanical industry. But a watch can; and William Petty used it to illustrate the division of labour in manufacture. Formerly the individual work of a Nuremberg artificer, the watch has been transformed into the social product of an immense number of detail labourers, such as mainspring makers, dial makers, spiral spring makers, jewelled hole makers, ruby lever makers, hand makers, case makers, screw makers, gilders, with numerous subdivisions, such as wheel makers (brass and steel separate), pin makers, movement makers, acheveur de pignon (fixes the wheels on the axles, polishes the facets, &c.), pivot makers, planteur de finissage (puts the wheels and springs in the works), finisseur de barillet (cuts teeth in the wheels, makes the holes of the right size, &c.), escapement makers, cylinder makers for cylinder escapements, escapement wheel makers, balance wheel makers, raquette makers (apparatus for regulating the watch), the planteur d'échappement (escapement maker proper); then the repasseur de barillet (finishes the box for the spring, &c.), steel polishers, wheel polishers, screw polishers, figure painters, dial enamellers (melt the enamel on the copper), fabricant de pendants (makes the ring by which the case is hung), finisseur de charnière (puts the brass hinge in the cover, &c.), faiseur de secret (puts in the springs that open the case), graveur, ciseleur, polisseur de boite, &c., &c., and last of all the repasseur, who fits together the whole watch and hands it over in a going state. Only a few parts of the watch pass through several hands; and all these membra disjecta come together for the first time in the hand that binds them into one mechanical whole. This external relation between the finished product, and its various and diverse elements makes it, as well in this case as in the case of all similar finished articles, a matter of chance whether the detail labourers are brought together in one workshop or not. The detail operations may further be carried on like so many independent handicrafts, as they are in the Cantons of Vaud and Neufchâtel; while in Geneva there exist large watch manufactories where the detail labourers directly co- operate under the control of a single capitalist. And even in the latter case the dial, the springs, and the case, are seldom made in the factory itself. To carry on the trade as a manufacture, with concentration of workmen, is, in the watch trade, profitable only under exceptional conditions, because competition is greater between the labourers who desire to work at home, and because the splitting up of the work into a number of heterogeneous processes, permits but little use of the instruments of labour in common, and the capitalist, by scattering the work, saves the outlay on workshops, &c.⁷ Nevertheless the position of this detail labourer who, though he works at home, does so for a capitalist (manufacturer, établisseur), is very different from that of the independent artificer, who works for his own customers.⁸

The second kind of manufacture, its perfected form, produces articles that go through connected phases of development, through a series of processes step by step, like the wire in the manufacture of needles, which passes through the hands of 72 and sometimes even 92 different detail workmen.

In so far as such a manufacture, when first started, combines scattered handicrafts, it lessens the space by which the various phases of production are separated from each other. The time taken in passing from one stage to another is shortened, so is the labour that effectuates this passage.⁹ In comparison with a handicraft, productive power is gained, and this gain is owing to the general co-operative character of manufacture. On the other hand, division of labour, which is the distinguishing principle of manufacture, requires the isolation of the various stages of production and their independence of each other. The establishment and maintenance of a connexion between the isolated functions necessitates the incessant transport of the article from one hand to another, and from one process to another. From the standpoint of modern mechanical industry, this necessity stands forth as a characteristic and costly disadvantage, and one that is immanent in the principle of manufacture.¹⁰

If we confine our attention to some particular lot of raw materials, of rags, for instance, in paper manufacture, or of wire in needle manufacture, we perceive that it passes in succession through a series of stages in the hands of the various detail workmen until completion. On the other hand, if we look at the workshop